High brightness 5050 SMD LED,Small volume smd led, Good quality SMD led, Reasonable price SMD led.

5050 smd led 1.High brightness&low power 2.small volume&size 3.Energy saving 4.Good quality& preferential price

1. Article: High brightness 5050 SMD LED,Small volume smd led, Good quality SMD led, Reasonable price SMD led.

2. Description:

(1) Brand: Made in China   

(2) Model: 5050 SMD LED

(3)Application scope: Surface contact type(4)Material: silicon (Si)

(5) Encapsulation: patch type(6)Packaging materials: resin packaging

(7) Power: low power(8)The frequency characteristics:  low-frequency  

(9) Emitting light colors: multicolour

(10)LED encapsulation: colorless transparent packaging (T) 

(11) Bright Dipping Surface: Surface luminescence tubes

(12) The luminous intensity angular distribution: scattering type  

(13) Positive working: 25 mA(14)The highest reverse voltage 5 (V)

3.Features:

(1)Small volume,

(2)Low power consumption,

(3)Long service life,

(4)High brightness,

(5)Environmental protection,

(6)Strong and durable firmly,

(7)Suitable for mass production and quick response,

(8)Shockproof,

(9)Energy saving,

(10)high resolution,

(11)Seismic,

(12) Design ,etc 

4.Caution :

(1) After open the package, the LED should be kept at 25oC, 65 % RH environment or less.

(2)The LED should be soldered within 6 hours after opening the package.

(3)The LAMP LED is an ESD sensitive device. All the equipment and machine must be properly grounded.

(4)when make use of it, please use static-free container, operator showld ware antistatic clothes and rope-static-ring also should make effective ground.

(5)Damaged device will appear some symptoms, lower forward voltage, higher leak current or even short circuit.

(6)ferrochromium soldering :power keep no more than 40W,tip temperature should not pass 280C , soldering time within 3 second .

(7)wave-soldering: temperature should not pass 265C, soldering time within 5 second.

(8)After soldering the LED should keep out off any shake or outer force before it come to normal temperature.

(9)LED is one-way continuity, please check electrode before mount, if amount wrong ,the LED chip will damage or fail when LED applied voltage.

(10)please design the PCB board to keep a distance between LED and other emit heat component (11)strongly recommend design the board according setting current other than setting voltage .if you are really need setting voltage type please consider there may cause influence arise by difference voltage of difference.

(12)the outer voltage change will bring the current index change .unsuitable design and current control, easy cause LED fail .for example excess current will cause LED life short or even burn down , too little electricity will cause lacking light.

(13)If you need make difference BIN LED in the one module .please confirm whether it can meet the electric and optics characteristic require such as the current balance, emitting and brightness consistency.

WE sell LED light emitting diode (SMD ),we have the  prompt delivery,  the goods have the excellent quality and reasonable price. Please feel free to contract us!

High brightness 5050 SMD LED,Small volume smd led, Good quality SMD led, Reasonable price SMD led.