Sale Driver IC MAX485

1) Driver IC MAX485 2)competitive price 3)high quality& professional staff 4)perect after sale service 5)Good reputation

 1. Article: Driver IC MAX485

Brand	MAXIM	Model	MAX485
Encapsulation	DIP	Batch NO.	10+
Workmanship	Semiconductor integrated circuit (S.C.I.C.)	Conduction type	Bipole
Size	9*18(mm)	Operating temperature	-40~85°C

2. summary

MAX481, MAX483, MAX485, MAX487 - MAX491 and MAX1487 is used for the RS- 485 and RS-422 communications with the low consumption transceiver, each device can a drive and a receiver. MAX483, MAX487, MAX488 and MAX489 has limited place, can reduce the rate of drive, and reduce the EMI by inappropriate terminal matching cable cause reflex, to realize the maximum 250kbps of error-free data transmission. MAX481, MAX485, MAX490, MAX491, MAX1487 drive pendulum rate is unrestricted, can achieve 2.5Mbps transmission rate. These transceiver in drive banned no-load or carrying condition, absorbs the source current in 120A to 500A MAX483. In addition, MAX481, with MAX487 has low current cut-off model, only 0.1A apms. All consumption devices are working under 5V single-supply next.

Drive with short circuit current limiting, and may through hot shut off the circuit will driver output set to high impedance condition, prevent excessive power loss. Receiver input with failure protection properties, when the input when open, can ensure that logic high-level output. 

3. The basic parameters:

 Half-duplex;

 Speed: 2.5 Mbps,

 Limit pendulum rate: NO,

 Low current cut-off mode: NO,

 Receiving allow control: YES,

 Static current :300,

 Load number: 32,

 Pin number: 8

4. Effect:

   MAX485 is used for the RS- 485 and RS-422 communication with the low consumption transceiver. MAX485 drive pendulum rate is unrestricted, can achieve 250 Mbps transmission rate. These transceiver in drive banned no-load or carrying condition, absorbs the source current in 120 μA to 500μA between. All parts are working in 5V single-supply next. Drive with short circuit current limiting, and may through hot shut off the circuit will driver output set to high impedance condition. Receiver input with failure protection properties, when the input when open, can ensure that logic high-level output. Has a higher anti-disturbance performance. MAX485 is the most common RS422 on market, also be the most consumable chip RS422 chip, cost-effective, high quality; delivery stability is most factories adopt its main reasons.

Sale Driver IC MAX485